
- RJD Engineering & Trading Ltd
- Withdrawal Sleeves Bearing Lock Washers Pillow Block Roller Bearing Units
RJD Engineering & Trading Ltd
- Address1032 Waterford Way, Suite 400 Miami, FL 33526 U.S.A
- Factory Address1032 Waterford Way, Suite 400 Miami, FL 33526 U.S.A
- Worktime9.00-18.00
- Phone(Working Time)1-786-8025300
- Phone(Nonworking Time)1-786-8025300
Withdrawal Sleeves
Contact NowWithdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts . The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts (→ Lock nuts) with appropriate locking devices are suitable. Lock nuts are not supplied with the sleeve and must be ordered separately. End plates are not produced by SKF.
series: FAG (Schaeffler) AH3138 Withdrawal Sleeves
FAG (Schaeffler) | AH3138 |
1 pcs | Negotiable |
thread size: FAG (Schaeffler) AHX3218 Withdrawal Sleeves
FAG (Schaeffler) | AHX3218 |
1 pcs | Negotiable |
overall length: FAG (Schaeffler) AHX3130 Withdrawal Sleeves
FAG (Schaeffler) | AHX3130 |
1 pcs | Negotiable |
overall length: FAG (Schaeffler) AH3048-H Withdrawal Sleeves
FAG (Schaeffler) | AH3048-H |
1 pcs | Negotiable |
includes: Standard Locknut LLC ASK-26 Withdrawal Sleeves
Standard Locknut LLC | ASK-26 |
1 pcs | Negotiable |
compatible shaft diameter: FAG (Schaeffler) AHX2326 Withdrawal Sleeves
FAG (Schaeffler) | AHX2326 |
1 pcs | Negotiable |