- RJD Engineering & Trading Ltd
- Withdrawal Sleeves Bearing Lock Washers Pillow Block Roller Bearing Units
English
RJD Engineering & Trading Ltd
- Address1032 Waterford Way, Suite 400 Miami, FL 33526 U.S.A
- Factory Address1032 Waterford Way, Suite 400 Miami, FL 33526 U.S.A
- Worktime9.00-18.00
- Phone(Working Time)1-786-8025300
- Phone(Nonworking Time)1-786-8025300
Withdrawal Sleeves
Contact NowWithdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts . The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts (→ Lock nuts) with appropriate locking devices are suitable. Lock nuts are not supplied with the sleeve and must be ordered separately. End plates are not produced by SKF.