- RJD Engineering & Trading Ltd
- Withdrawal Sleeves Bearing Lock Washers Pillow Block Roller Bearing Units
English
RJD Engineering & Trading Ltd
- Address1032 Waterford Way, Suite 400 Miami, FL 33526 U.S.A
- Factory Address1032 Waterford Way, Suite 400 Miami, FL 33526 U.S.A
- Worktime9.00-18.00
- Phone(Working Time)1-786-8025300
- Phone(Nonworking Time)1-786-8025300
Withdrawal Sleeves
Contact NowWithdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts . The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts (→ Lock nuts) with appropriate locking devices are suitable. Lock nuts are not supplied with the sleeve and must be ordered separately. End plates are not produced by SKF.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| overall length: SKF AHX 2324 G Withdrawal Sleeves | SKF | AHX 2324 G | 1 pcs | Negotiable |
| thread size: SKF AHX 3130 G Withdrawal Sleeves | SKF | AHX 3130 G | 1 pcs | Negotiable |
| d SKF AH 3232 G Withdrawal Sleeves | SKF | AH 3232 G | 1 pcs | Negotiable |
| G1 SKF AOH 3056 Withdrawal Sleeves | SKF | AOH 3056 | 1 pcs | Negotiable |
| Mass withdrawal sleeve SKF AHX 3222 G Withdrawal Sleeves | SKF | AHX 3222 G | 1 pcs | Negotiable |
| d1 SKF AH 24040 Withdrawal Sleeves | SKF | AH 24040 | 1 pcs | Negotiable |